Brewing a tiny IPA in 7 days


I was excited about the Super Bowl and invited some people over to watch it. I also decided that I wanted to make a beer specifically for the Super Bowl. The only problem was that I thought the game was later on in the month of February and I had plenty of time to brew a beer. I only had seven days (from brew day) to turn around a beer.

I’ve turned around beers in short time frames for competitions, parties, even just for the challenge. The challenge with this beer was that I (for once) had a beer in mind that I really wanted to replicate. I’ve been drinking a lot of Oskar Blues Pinner Throwback IPA since I moved down to North Carolina. I’m sure many people are familiar with Oskar Blues, which started as a brewpub in Colorado. They later opened production facilities in Austin, TX and Brevard, NC. They maintain a strong “local” presence here in the North Carolina market, at least from what I’ve seen at beer retailers.

The tricky part here, as I mentioned before, was time. Pinner clocks in at 4.9% ABV, and while that’s relatively low on the ABV scale, I felt using enough fermentable wort to get to 4.9% would take too long to ferment, clean up, and clear in one week. So I bumped it down and shot for 4.0%, similar to the English bitter styles I have turned around in short time frames. Another tricky aspect was that I found very little information in regards to recipe formulation for this beer. There were a few threads on some homebrew forums about people attempting clones but not much follow-up. I did come across an article that mentioned Pinner is possibly “dry-hopped with Mosaic, Citra, El Dorado and Azacca hops, for aroma and flavor”. El Dorado was the only hop I didn’t have, so I swapped it for EXP 1210. I don’t have much experience with El Dorado, but EXP 1210 seemed to fit well with the line up of hops for this beer.

Malt bill was another mystery, but I had to think (and brew) fast. Pinner doesn’t seem to possess any unique malt characteristics other than being slightly toasty. I remember being intrigued by Tasty’s Session Pale Ale, a very low ABV hoppy pale ale recipe I have seen online. He uses several base and crystal malts to layer flavors and create depth, which is needed in such low alcohol beers like this that can come across as thin or watery. I ended up only blending two base malts instead of three because it saved me a trip to the homebrew store.I’ve also read several corroborating reports about the importance of hops in relation to mouthfeel in session beers but with limited experience making hoppy session beers, I’d have to trust these hops to do the job.

I went with a high mash temp (more residual sugars for better mouthfeel), a larger-than-normal dose of fast fermenting and highly flocculating yeast (Safale S-04 FTW!), finings to clear the beer in the keg as quickly as possible, and a quick carbonation schedule (24 hours of 45 PSI of CO2 at near freezing temps). Also, there wasn’t enough time to do a proper dry-hop regimine, so I added the dry-hops 24 hours after pitching yeast, during high krausen.

I split this ten gallon batch between two fermentors so I could pitch Wyeast 1318, but allowed that portion to cold crash and carb longer because I wouldn’t need 10 gallons of beer for the Super Bowl. Tasting notes from that will be posted soon.


S-04 MiniPin, Pinner, Pinner Can.

S-04 MiniPin (Pinner Clone)

I will include comparisons with Pinner in this tasting assessment

Appearance.  Copper to orange in the MiniPin that is very clear thanks to the finings, even after 7 days. MiniPin is darker in color, my guess is there is no caramel 40 malt (or higher) in Pinner. Probably a large dose of carapils used in Pinner. Pinner is slightly hazy.

Aroma. Pinner is more dank smelling and has notes of fruit salad. There is some dankness/marijuana in the clone but to a lesser degree. Clone is sweeter smelling, maybe strawberry/blueberry with slight dank. Both smell delicious, but Pinner is much more intense and aromatic.

Taste and Mouthfeel.  Very close on the mouthfeel. Both beers are somewhat thin, but not distractingly so. The clone would benefit from more body. Both are very refreshing. There is also diacetyl in the clone, but it doesn’t ruin the beer.

Overall Impressions. This is definitely not cloned, but it also wasn’t entirely intended to be. I shot for a much lower alcohol content in my beer (4% vs 4.9%) and didn’t actually compare SRM color estimations from Beertools with Pinner’s SRM which would have alerted me to the c40 issue. The mouthfeel discrepancy would be resolved with increasing the ABV and raising the mash temp one or two degrees. The abbreviated dry hopping also did not help the clone beer, as the aroma was weak early on and faded quickly after kegging. If there were more time, I would have dry hopped in two doses over 7 days and used El Dorado instead of EXP 1210. I also wouldn’t call it a “Tiny IPA” quite yet, at least until I can find a way to pack more hop aroma into this small beer in such a short time. This is a promising beer that was well received for the party, it just needs a few tweaks to make it great.

Pinner lite
Date: 1/31/16
Size: 13.44 gal @ 68 °F
Efficiency: 83.0%
Attenuation: 72.0%
Calories: 146.98 kcal per 12.0 fl oz
Original Gravity: 1.044 (1.045 – 1.060)
Terminal Gravity: 1.012 (1.010 – 1.015)
Color: 7.4 (5.0 – 14.0)
Alcohol: 4.15% (4.5% – 6.0%)
Bitterness: 0.0 (30.0 – 45.0)

9.0 lb (44.0%) Standard 2-Row – added during mash
6.81 lb (33.3%) Pearl Pale Ale Malt – added during mash
44.0 oz (13.5%) Caramel Malt 10L – added during mash
15.0 oz (4.6%) Caramel Malt 40L – added during mash
15.0 oz (4.6%) Cara-Pils® Malt – added during mash
2 mL HopShot – added during boil, boiled 60 m
1.0 oz (8.3%) Mosaic (11.5%) – added during boil
1.0 oz (8.3%) Citra™ (12.0%) – added during boil
1.0 oz (8.3%) EXP 1210 (6.4%) – added during boil
1.0 oz (8.3%) Azacca (0.0%) – added during boil
1.0 ea Fermentis S-04 Safale S-04
600 mL WYeast 1318 London Ale III™
2.0 oz (16.7%) Mosaic (11.5%) – added dry to primary fermenter
2.0 oz (16.7%) Citra™ (12.0%) – added dry to primary fermenter
2.0 oz (16.7%) Azacca (0.0%) – added dry to primary fermenter
2.0 oz (16.7%) EXP 1210 (6.4%) – added dry to primary fermenter

Sacch Rest – Rest: 45 m; Final: 158.0 °F

gypsum 2g, epsom 3.2g, 1.6 bk soda, 5.2g CaCl, 4g chalk (used pale ale Haydts Bru’n Water setting)
Mash pH 5.40 at mash temp (MW102 probe has temp correction)
Mashed in at 157 dropped to 154F
Boil: gypsum 2.5g, epsom 4g, 6.5g CaCl
Added extra sparge wort to bring to ~15.66 gals to lower OG. Pre boil 5.35 pH 1.037
Post boil 1.044 5.23 60 secs O2, non rehydrated pack of S04 and 600 mL 1318 slurry starter
Pitched at 76F bc thermo on chiller must be busted
Chilled down to 64 overnight and put in heater with ranco set at 68. Allowed to free rise starting 24 hours later (set 74F max limit). Dry hopped 24 hours later as well. Lots of yeast activity. Ramped up to 72F over 5 days, began crash cool on 2/4/16
S-04 1.012, 1318 1.014
Kegged S04 with finings 2/5/16, 1318 on 2/14/16

Tagged , , , ,

5 thoughts on “Brewing a tiny IPA in 7 days

  1. Raudel says:

    Might Have to try this, Thanks!

  2. J says:

    He lives!

  3. Jeff says:

    What happened with the nano?

Leave a Reply to J Cancel reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: